Support Forum

Please note that this forum is only available to you in read only mode. In order to contribute to this conversation you will need to renew your subscription.

How to get more than 2 columns in masonary

zentoolsIf you use Zentools please post a review at the Joomla! Extensions Directory.

Hello,
So I just can't figure out how to get more than 2 columns to show using the masonary theme. I'm using Focus2 template and there is plenty of room for more images to the side, but they just won't go there. I have it set for Grid2 with no other module positions next to it through the template; and it is pulling content from two K2 cats.

I've also got it set to equal height which doesn't seem to be working either so I guess I'll have to go in and adjust the pics sizes (no biggie).

Thoughts?

motofrog.net

Oh yeah, and when you load the home page, the menu bar blacks the logo until you scroll a bit then it jumps into place... weird.

Thanks in advance!
  • Douglas Rost's Avatar
  • Douglas Rost
  • LIfetime Developer - Big Bamboo
  • 152 posts
  • Karma: 0
Last Edit: 5 years 1 week ago by Douglas Rost.
The administrator has disabled public write access.
Hi Douglas,

Equal heights won't work with masonry

With the images in columns if you adjust the image size in the image settings does that work?

Cheers
Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
With the logo do you mean it disappears briefly before the sticky navigation kicks in?
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
Hi Paul,

1) If I adjust the image size it has no effect, it still stays as only 2 vertical columns.

2) Never mind about the logo cause now it's not doing it anymore! :whistle:
  • Douglas Rost's Avatar
  • Douglas Rost
  • LIfetime Developer - Big Bamboo
  • 152 posts
  • Karma: 0
The administrator has disabled public write access.
Are you able to attach some screenshots of your settings?

Cheers
Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
Here you go...

jb1.png


jb2.png


jb3.png


jb4.png


jb5.png


jb6.png
  • Douglas Rost's Avatar
  • Douglas Rost
  • LIfetime Developer - Big Bamboo
  • 152 posts
  • Karma: 0
The administrator has disabled public write access.
With the image resize attempt - did you adjust in the module or in K2?

Cheers
Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
I've tried it in both...
Right now I have the image settings in the module cranked way down (see attached) and when I refresh the screen, it initially puts them into 3 column, then jumps to 2. K2 images are set to small in the cat display and item display

module.png



Also, back to the logo/ menu placement, when I refresh the screen it is blocking it again. See the attached and notice that the scroll bar is all the way to the top, yet it is blocked.

homepage.png
  • Douglas Rost's Avatar
  • Douglas Rost
  • LIfetime Developer - Big Bamboo
  • 152 posts
  • Karma: 0
The administrator has disabled public write access.
I'll check with the developers on this

Cheers
Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
What dimensions are set in k2?

Cheers
Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
Hi Paul,
The images are set in the category to small, which is set at the global of 200px wide.
  • Douglas Rost's Avatar
  • Douglas Rost
  • LIfetime Developer - Big Bamboo
  • 152 posts
  • Karma: 0
The administrator has disabled public write access.
the same here with images how can i fill or disable the third column?

www.joomla34.maschin.ch/test/masonry-web.html

thx 4 reply
  • marc's Avatar
  • marc
  • 12 Month Developer
  • 101 posts
  • 3 Thanks
  • Karma: 0
The administrator has disabled public write access.
Hi folks

Are you all using the latest version of the module?

And if you installed it recently you clicked the master css button afterwards?

Cheers
Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
Yes master css is enabled and the latest version of zentools and builder installed.
thx 4 reply

marc
  • marc's Avatar
  • marc
  • 12 Month Developer
  • 101 posts
  • 3 Thanks
  • Karma: 0
The administrator has disabled public write access.
oh sorry i found it - i have to create a master css file - now it appears with 4 columns.
  • marc's Avatar
  • marc
  • 12 Month Developer
  • 101 posts
  • 3 Thanks
  • Karma: 0
The administrator has disabled public write access.
Thanks Marc,

Enjoy the rest of your weekend

Cheers
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
The following user(s) said Thank You: marc
Douglas - does this help you?
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.
Yes Paul, thanks!
  • Douglas Rost's Avatar
  • Douglas Rost
  • LIfetime Developer - Big Bamboo
  • 152 posts
  • Karma: 0
The administrator has disabled public write access.
Cheers thanks for the update

Paul
  • manh's Avatar
  • manh
  • Moderator
  • 45248 posts
  • 2106 Thanks
  • Karma: 603
The administrator has disabled public write access.

zentoolsIf you use Zentools please post a review at the Joomla! Extensions Directory.

Happy Campers